DN40 - DN500 Flanged Control Valve , Pneumatic Operated Control Valve

Features of intelligent control valves:

1. the use of wide body, flow and the flow of the design of the area, the valve resistance is small.
2. the overall valve is connected with stainless steel wire, convenient for the day when the day of

maintenance.
3. the electric phase inverter using 1/2 "diameter circulation ability, overcome the precursor hole easy

plugging ills, provide direct, fast, accurate control.
4. electrical components line box, all of the use of moisture, waterproof design, suitable for and under the

installation.
5. double room driving device, with a slow, slow closing function, so that it works effectively to prevent water

hammer and vibration.
6. the use of hydraulic principle, so that the valve plate to close the force of the water into direct ratio, high

reliability and high reliability.

Intelligent control valve technology parameters:

1. Motion range:0..3MPa-1.6MPa Open and close freely

2. response time:<10S

3. Opening times:>8000 times

4. Pressure loss:<0.05MPa

5. Sealing performance:No leakage

6. Working condition:Stability without water hammer and vibration

7. Working pressure:1.0MPa,1.6MPa

8. Driving mode:Motor (3V-6V)

9. Operating current:80±10％mA

10. Position current:0mA

11. Output power:max 2.5w

12. Torque:2 N.m

13. Travel time:5-7s

14. Direction of rotation:Bidirectional rotation

15. Protection level:IP67